Help

IT Support
Mir A. Mohammad
(678) 768-4985‬ Mobile
(404) 894-4647 office
mir@gatech.edu

General Help
Andrew Dugenske
(404) 323-0637 mobile
dugenske@gatech.edu

Symposium location, directions, and visitor Wi-Fi access information are presented below.

The Internet of Things for Manufacturing Symposium is being held at the
Georgia Tech Manufacturing Institute (GTMI) building

(also known as the
Callaway Manufacturing Research Center)

Driving Directions and Campus Map Info below:

Georgia Tech Manufacturing Institute (campus building address)
813 Ferst Drive, N.W., Atlanta, GA 30332-0560

View Large Map [from Google maps] : We are in the “Callaway Manufacturing Research Center Bldg.” on the map. (A campus map PDF link is below these driving directions — GTMI is identified as building 126 on the map).

Interactive Campus Map [On this map we’re the “Manufacturing Research Center” bldg.]

Another version of the campus map >> (GTMI is identified as building 126 on the map)

From South of Atlanta (including the Atlanta Airport)

– North on I-75 or I-85 toward Atlanta. (At the airport, I-85 North)

– I-75 and I-85 will merge

– Exit at 10th Street/Georgia Tech (Exit 250)

– Left on 10th Street

– Go to the 4th traffic light (about 3/4 mile)

– Left on Hemphill Avenue

– Go to the stop sign which is at Ferst Drive

GTMI is the 4-story building at Ferst Drive and Hemphill Avenue

From North of Atlanta

– South on I-75 toward Atlanta

– Exit at 10th/14th Streets (Exit 250)

– Right on 10th Street

– Go to the 4th traffic light, about 3/4 mile

– Left on Hemphill Avenue

– Go to the stop sign which is at Ferst Drive

GTMI is the 4-story building at Ferst Drive and Hemphill Avenue

– South on I-85 toward Atlanta

– Exit at 10th/14th Streets (Exit 84)

– Right on 10th Street

– Go to the 4th traffic light, about 3/4 mile

– Left on Hemphill Avenue

– Go to the stop sign which is at Ferst Drive

GTMI is the 4-story building at Ferst Drive and Hemphill Avenue

From East and West of Atlanta

– I-20 to Atlanta

– Exit I-75/I-85 North

– Exit at 10th Street/Georgia Tech (Exit 250)

– Left on 10th Street

– Go to the 5th traffic light (about 3/4 mile)

– Left on Hemphill Avenue

– Go to the stop sign which is at Ferst Drive

GTMI is the 4-story building at Ferst Drive and Hemphill Avenue

    PARKING MAP:

    10th Street is at the top of the map going east/west (horizontal).

    State Street is going north/south (vertical). Two visitor parking areas are accessible from State Street.

    Visitor Area 4, located at Ferst Drive and the State Street intersection, is the closest parking to the building. The parking fee is $2/hour.

    Parking is metered. The ParkMobile app (or credit card) can be used to pay for parking. Georgia Tech parking details can also be found here:
    https://www.pts.gatech.edu/parking/visitor-parking/

    Visitor Wireless Internet Access

    Eduroam 
    Georgia Tech students, faculty and staff and other participating educational institutions may connect to the eduroam network from anywhere on campus. 

    Free Guest Wifi Using GT Visitor 

    Free WiFi is available to all guests who visit the Exhibition Hall and West Village Dining Commons. The free Wifi network has limited bandwidth at 3 megabits/second and is intended for use to accomplish simple tasks on the internet such as checking email. 

    1. On your device, locate and connect to the SSID “GTVisitor”. 

    2. Next, you should get a prompt to login. If you are using a laptop, you may need to open a browser page first and attempt to navigate to a new website. Mobile devices should automatically bring up the login page or show a message stating you need to login. 

    3. Once the page is loaded, you should see a page that looks like this: 

    4. For free access, select the login button. 

    Premium/Higher Bandwidth Internet Access

    Premium service comes with an increase in data speeds, technical support, and a public IP address. Premium services can be purchased from the portal or if you have a group of conference attendees that will all need premium service, passes can be purchased in increments of 1day, 1 week, and 1 month. The duration of access is contiguous; and is not based on the amount of time the device is connected to the network. Once the user logs in, their access will expire after the amount of time associated with the account elapses, regardless of the activity of the user. GTvisitor passes which have not been used to login do not expire.

    If you selected the “Free” option and discover that you require increased speeds and wish to purchase a pass for Premium service, you can navigate your browser to http://4.5.6.7 to log out of your existing session.

    Increased Speed Rates (for up to 10Mbits/s) for GTvisitor are as follows:

    • $3/day
    • $10/week
    • $30/month